Edge-lighting Greta LED User Manual download pdf (Page 2)

Install the Fixture

cutout.

5: Place the mounting plate to the junction box and level

mounting studs.

6: Secure the mounting plate to the junction box using two

#8-32 screws.

Feed the LED power wires through the mounting plate center

LED TRANSFORMER

WIRE NUT

JUNCTION BOX

1: Connect the white LED transformer wire to the neutral

power wire with a wire nut.

2: Connect the black LED transformer wire to the hot power

wire with a wire nut.

3: Place the LED transformer and all wire connections inside

the junction box.

relief center hole of the backplate and canopy.

8: Place the back plate and canopy on to the mounting posts

and tighten both nuts securely.

Feed the LED transformer power wires through the strain

NOTE: It is recommended more than one person assist with

installing this fixture.

MOUNTING

PLATE

JUNCTION

BOX HOLE

#8-32 SCREW

NUT

MOUNTING

POST

BACK PLATE

9: Align the backplate screw holes to the electrical box

mounting holes, and place the backplate on wall to mark

the anchor location.

10a: If mounting fixture centered: mark the end holes on

the wall. These marked holes are for anchors.

10b: If mounting fixture off centered: slightly loosen the

two backplate screws and slide the backplate to the

desired position and tighten the backplate screws. Mark

the end holes of the backplate on the wall. These marked

holes are for anchors.

ADJUSTMENT

BACKPLATE

SCREW

BACKPLATE

END

HOLE

MOUNTING

PLATE

10a

10b

1 2 3 4

Greta LED 1
Install the Fixture 2

Comments to this Manuals

No comments

Edge-lighting Greta LED User Manual Page 2

Comments to this Manuals

Related products and manuals for Lighting Edge-lighting Greta LED