Edge-lighting Quattro LED User Manual download pdf

FJ-QUA-12-SN

Installation Instructions for Fast Jack Quattro LED Pendant

904-FJ-QUA-01

1718 W. Fullerton Ave

Chicago, IL 60614

Tel: 773-770-1195

Fax: 773-935-5613

www.edgelighting.com

[email protected]

Adjust the Fixture Height

1: Cut the coaxial cable to the desired height (H) with a sharp

cutter. The overall fixture height is measured from the

bottom of the metal shade to the end of the coaxial cable.

M4 SET SCREW

M3 SET

SCREW

1.5MM ALLEN

WRENCH

2MM ALLEN

WRENCH

COAXIAL FIXTURE CONNECTOR

2: Loosen the M4 set screw on base of the coaxial fixture

connector with the 2mm Allen wrench provided. Do not

remove this set screw.

3: Remove the M3 set screw on tip of the connector with the

1.5mm Allen wrench provided.

METAL SHADE

COAXIAL CABLE

SAVE THESE INSTRUCTIONS!

- This product is ETL listed for indoor dry locations.

- The product is intended to be used with Edge Lighting

Monorail systems only.

IMPORTANT INFORMATION

CONICAL NIPPLE

STRAIN RELIEF TUBE

COAXIAL CABLE

4: Feed the coaxial cable through the conical nipple and flared

side of the strain relief tube. Slide the conical nipple and

strain relief tube down the coaxial cable.

COAXIAL CABLE

5: Feed the coaxial cable into the coaxial fixture connector. The

coaxial cable will come to a stop point.

1 2

Summary of Contents

Page 1 - Fast Jack Quattro LED Pendant

FJ-QUA-12-SNInstallation Instructions for Fast Jack Quattro LED Pendant904-FJ-QUA-011718 W. Fullerton AveChicago, IL 60614Tel: 773-770-1195Fax: 773-93

Page 2 - CIRCUIT #2

2 9: Push the strain relief tube completely into the coaxial fixture connector. Make sure the slot on the strain relief tube is not inlin

Comments to this Manuals

No comments

Edge-lighting Quattro LED User Manual

Browse online or download User Manual for Lighting Edge-lighting Quattro LED. Edge Lighting Quattro LED User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Edge-lighting Quattro LED