Edge-lighting Box Pro Aim MR16 User Manual download pdf

SAVE THESE INSTRUCTIONS!

M-BOX-_

FJ- -_BOX

M2- -_BOX

- This product is ETL listed for indoor dry locations.

- This product is not restricted to certain height installation.

It is approved to be used at any height above the floor.

- Applicable accessories are Hexcell Louver, Glass Lenses &

MR16 Snout.

1: Pull the shade completely off of the fixture body.

Box Pro-Aim

Installation Instructions for

Install the Lamp & Lens Accessory

904-BOX-02

IMPORTANT INFORMATION

SHADE

1718 W. Fullerton Ave

Chicago, IL 60614

Tel: 773-770-1195

Fax: 773-935-5613

www.edgelighting.com

[email protected]

To reduce the risk of fire, electrical shock, exposure to

excessive UV radiation, or injury to persons:

- Use this fixture indoors only.

- Do not look directly at the lamp while the fixture is on.

- RISK OF FIRE: Use only the type of lamp and maximum

wattage indicated in this instruction manual.

- Never cover the halogen lamp with anything other than a

lamp shield provided by Edge Lighting and never place

flammable material close to the fixture.

- Never turn the fixture on and off by connecting and

disconnecting the halogen lamp.

- Do not touch the fixture head, shade or lamp shield while

the fixture is on. These surfaces may be VERY HOT.

- Do not touch lamp at anytime. Use a soft cloth. Oil from skin

may damage lamp.

- It is normal for a new halogen lamp to produce minor

smoke when first turned on.

- Do not operate the luminaire with a missing or damaged

shield.

- Turn power off and allow to cool before replacing lamp.

IMPORTANT SAFETY INSTRUCTIONS

FIXTURE BODY

2: Push the lamp pins completely into the socket holes.

CAUTION: To reduce risk of a burn or electrical shock during

lamping, disconnect the power to the fixture.

Use MAX 50 Watt IR, Type MR16 Front Glass Cover

Halogen Lamp.

1 2 3 4

Summary of Contents

Page 1 - Box Pro-Aim

SAVE THESE INSTRUCTIONS!M-BOX-_FJ- -_BOXM2- -_BOX- This product is ETL listed for indoor dry locations.- This product is not restricted to certain hei

Page 2

F7: body and push it completely until it snaps in place properly.Line up the notch on the shade with the tabs on the fixture C3: ighten the M4 se

Page 3 - CIRCUIT #1 CIRCUIT #2

3Install the Box to the Monorail (MC-FJ-_)HOUSINGCONNECTOR(DISCARD)1G1: Remove the Monorail housing connector from the Monorail Fast Jack housing

Page 4 - FJP-4RD-_)

4Pro-Aim Positioning and Locking the BoxNO12MM ALLEN DRIVER2: Use the 2mm Allen driver on the bottom of the Box arm to tilt the head up or down.2P

Comments to this Manuals

No comments

Edge-lighting Box Pro Aim MR16 User Manual

Browse online or download User Manual for Lighting Edge-lighting Box Pro Aim MR16. Edge Lighting Box Pro Aim MR16 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Edge-lighting Box Pro Aim MR16